The Electrical Installation and Maintenance NC II Qualification consists of
competencies that a person must achieve to enable him/her to install and maintain
electrical wiring, lighting and related equipment and systems where the voltage does
not exceed 600 volts in residential houses/buildings.
At the end of the Units, you should be able to:
1. Obtain and Convey Workplace Information.
2. Participate in Workplace Communication.
3. Complete Relevant Work Related Documents.
4. Describe Team Role and Scope
5. Work as a Team Member.
6. Integrate Personal Objectives with Organizational Goals.
7. Set and Meet Work Priorities.
8. Maintain Professional Growth and Development.
9. Identify Hazards and Risks.
10. Evaluate Hazards and Risks.
11. Control Hazards and Risks.
12. Maintain OHS Awareness
The Electrical Installation and Maintenance NC II Qualification consists of
competencies that a person must achieve to enable him/her to install and maintain
electrical wiring, lighting and related equipment and systems where the voltage does
not exceed 600 volts in residential houses/buildings.
This Qualification is packaged from the competency map of Electrical and
Electronics sector as shown in Annex A.
This course is designed to equip individual with operational skills , attitude and knowledge about Plumbing NCII.
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
NOMINAL DURATIONBasic Competency 18 Hours
Common Competency 24 Hours
Core Competency 120 Hours
TOTAL 162 Hours
- Teacher: Edwin Once
The TILE SETTING NC II Qualification consists of competencies that a person must achieve to enable him / her to lay tiles on plain and curved surfaces for walls, floors and other application and repair of tiles on plain and curved surfaces.
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
Basic Competency 37 Hours
Common Competency 24 Hours
Core Competency 56 Hours
TOTAL 117 Hours
- Teacher: Jonathan Binayug
- Teacher: Freddie De Juan
- Teacher: Jacqueline Esarza
- Teacher: Crisanto Once
- Teacher: Edwin Once
- Teacher: Maria Crisella Once
- Teacher: Evangelina A. Tanig
This course is designed to provide the learner with the knowledge, practical skills and attitude, applicable in performing work activities involve in performing tasks such as layout reference lines, fabricate, install and remove wooden formworks, install wooden door jamb, window frame and panels, install ceiling and wall frames and panels, fabricate and install wooden stairs, install wooden floor supports and panels, fabricate and install roofing system and fabricate and install the wooden cabinet.
This includes online learning activities and practical work in the actual work site or simulation area. Upon completion of the course, the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain this, all units prescribed for this qualification must be achieved.
Nominal Duration:
- Basic Competencies = 37 Hours
- Common Competencies = 24 Hours
- Core Competencies = 240 Hours
Total = 301 Hours
- Teacher: Jonathan Binayug
- Teacher: Crisanto Once
- Teacher: Edwin Once
- Teacher: Maria Crisella Once
This course is designed to equip individual with operational skills in construction painting, such as preparing tools, painting materials and equipment, preparing surface for painting, performing painting work, and performing re-touching work.
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
NOMINAL DURATIONBasic Competency 18 Hours
Common Competency 24 Hours
Core Competency 136 Hours
TOTAL 178 Hours
- Teacher: Jonathan Binayug
- Teacher: Jacqueline Esarza
- Teacher: Crisanto Once
- Teacher: Edwin Once
- Teacher: Maria Crisella Once
- Teacher: Evangelina Tanig
This course is design to develop knowledge, skills and desirable work attitude along scaffold erection. It covers the basic, common and core competencies, eg., erecting and dismantling scaffolding and handling scaffolding equipment and tools.
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
Basic Competency 18 Hours
Common Competency 24 Hours
Core Competency 120 Hours
TOTAL 162 Hours
- Teacher: Maria Crisella Once
- Teacher: Evangelina A. Tanig
This course is designed to enhance the knowledge, skills and attitudes in Scaffolding Works II. It covers the basic, common and core competencies .
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
NOMINAL DURATION
Basic Competency 37 Hours
Common Competency 24 Hours
Core Competency 120 Hours
TOTAL 181 Hours
- Teacher: Jonathan Binayug
- Teacher: Jacqueline Esarza
- Teacher: Maria Crisella Once
This
course is designed to enhance the knowledge, skills and desirable work attitude
of a tile setter. It covers the basic, common and core competencies i.e. lay
and repair floor and wall tiles, tile corners and curved surfaces.
The method of teaching is blended. This includes e-learning activities and face to face practical work in actual work or simulation area.
Upon the completion of the course , the learners are expected to demonstrate the above mentioned competencies to be employed. To obtain thus , all units prescribed for this qualification must be achieved.
NOMINAL DURATION
Basic Competency 18 Hours
Common Competency 24 Hours
Core Competency 40 Hours
TOTAL 82 Hours
- Teacher: Jonathan Binayug
- Teacher: Maria Crisella Once
The Shielded Metal Arc Welding (SMAW) NC II Qualification consists of
competencies that a person must achieve to weld carbon steel plate and pipe
components as specified by layout, blueprints, diagrams, work order, welding
procedure or oral instructions using shielded metal arc welding equipment.
This Qualification conforms with American Welding Society (AWS) D 1.1
Structural Welding Code; American Society of Mechanical Engineers (ASME) IX
Boiler and Pressure Vessel Code; American Petroleum Institute (API) 1104 Code for
Gas and Oil Pipeline Facilities; and International Standards Organization (ISO) 9606-
1 Qualification of Welders for Steel.